Semi-Automatic KN95 Mask Production Line
The KN95 semi-automatic mask machine includes a full set of
assembly line production equipment for mask forming, mask blanking,
mask cutting, ear strap welding, upper nose bridge, printing,
welding, etc. Among them, the mask forming and mask mask production
use semi-automated ultrasonic equipment and masks. The blank
holding and cutting can be completed by one machine, which greatly
improves the production efficiency. The production equipment of
KN95 semi-automatic mask machine is composed of a slicer, a
semi-automatic ultrasonic ear wire machine, and a blank pressing
KN95 mask production steps:
1. Incoming material embossing and cutting: unwinding material,
three layers of non-woven fabric, one layer of velvet cloth,
knurled cutting once formed, knurled cutting formed samples.
2. Ultrasonic welding ear wire: manual single-point welding ear
wire, one mask with four welding points, it takes about 6 seconds
to complete the ear wire welding work of a mask.
3. Nose bridge support: Install the nose bridge support on the
sheet mask through the viscous device. Nose bridge support: length:
9mm width: 5mm.
4. Forming by folding and crimping: the part of the right side is
pressed after being opened.
The KN95 mask is actually a mask that meets the requirements of
China's GB2626 standard. GB means the national standard. The
standard is the filtration efficiency of non-oily particulate
N95 masks are NIOSH certified by the United States, and the
standard is also the filtration efficiency of non-oily particulate
KN95 mask body machine, also known as mask tablet machine, is a
machine used for semi-automatic production of multi-layer flat mask
products. It can use 1 ~ 4 layers of N95PP spunbond non-woven
activated carbon and filter materials. The entire machine is made
from raw materials Feeding to the insertion of the nose line, edge
banding, and cutting the finished product are all a line of
semi-automatic operation. The flat mask production equipment has
stable performance, high output, low defect rate and easy
operation. The mask body machine plus several inner ear band mask
machines, outer ear band mask machines, strap type mask machines or
ear strap spot welding machines, can produce various kinds of masks
such as inner ear wearing masks, outer ear band masks, strap masks
and so on.
KN95 mask machine features:
1. The machine is dense, small in size and does not occupy space;
2. PLC program control, high stability and low failure rate;
3. The whole machine adopts aluminum alloy structure, which is
beautiful and firm without rust;
4. Photoelectric detection to reduce the error rate.
5. The welding strength of the ear strap is adjustable.
6. Using ultrasonic system, stable performance and easy operation.